WING 2 – Pulley
- Unique closure for increased safety
- Guards serve a dual purpose by keeping clothing and hair away from the wheels and carrying backup lines
- Sealed steel ball bearings
- Stainless steel sheaves
- Maximum speed: 20 m/sec, 45 mph
The Wing introduces a new level of safety to zip lines with an elegant pivot locking mechanism. This system makes attaching participants to cable or rope faster and easier. It also ensures that the pulley cannot detach from the line while it is loaded. Features efficient steel bearings for high-speed adventure and stainless steel sheaves for durability. Thermoplastic guards prevent accidental entanglement from clothing and hair and carry backup lines along with the pulley on upright prongs.
| Ref. | Product name | Weight | Inner sheave diameter | Rope diameter | Cable diameter | Working load max | Breaking load | Ball bearings | Sheave material |  |
||||
| g | oz | mm | in | mm | in | mm | in | kN | EN 12278 | |||||
| 1025 | WING 2 | 347 | 12.2 | 26 | 1,02 | 13 | 0,51 | 12 | 0,47 | 1349 LBF | 15 | • | Stainless steel | • |
Related Products
-
INSPECTING PPE – Manual
“Inspecting P.P.E.” is a publication that meets the relevant demands of users and controllers of Personal Protective Equipment against falls from a height, work positioning, rope access, technical rescue and mountaineering. This manual is structured in 16 chapters with a comprehensive general introduction and practical instructions for the inspection of all PPE product categories.
-
DRYAD – Pulley
Compact double pulley for block-and-tackle systems. Main attachment point accommodates two carabiners and the becket features a bottom attachment point for linking components in a block-and-tackle system. For use with ropes up to 13 mm. Prusik minding, the self-locking knot can be installed on both sides of both wheels. Self-lubricated brass bushings are sufficient for light applications at low speed. Efficiency: 80%. Aluminum alloy body and wheels, stainless steel axle.
-
NAIAD – Pulley
A high strength multifunctional pulley for heavy hauling and complex operations. Features a large wheel, a main attachment point that accommodates three carabiners, a large bottom attachment point, and two secondary attachment points on the sides for linking, positioning and attaching progress capture systems. For use with ropes up to 16 mm. Prusik minding, the self-locking knot can be installed on both sides. Self-lubricated bushings are sufficient for light applications at low speed. Efficiency: 90%. Aluminum alloy body and wheel, stainless steel axle.
-
TURBOFOOT – Foot ascender
Proprietary rollers increase climbing efficiency and decrease wear and tear on the device and ropes Innovative straps provide a secure and ergonomic fit on boots Can be rigged as a locking pulley for light hauling (max load 50 kg, 110 lbs) For ropes from 8 to 13 mm Available in right and left versions
