Electric heat rope cutter
1. Suitable for commercial and industrial use, this heat cutter can efficiently cut various materials including canvas, synthetic fabric, rope, lightweight foam, KT board pink foam, polyurethane, polyethylene, expanded polystyrene (EPS), extruded polystyrene (XPS), styrofoam, polyester foam, sponge, and rubber.
2. Adjustable Temperature Control: With the 50-500°C stepless temperature control and a quick 5-second heating time, you can easily adjust the temperature according to the material being cut, ensuring a precise and efficient cutting experience.
3. Rapid Warm-up Time: This hand-held electrothermal cutter heats up quickly due to high current, reaching the red state in just a few seconds, allowing for high efficiency and short warm-up times.
4. Superior Cutting Effect: The fabric hot cutter delivers a clean cutting effect with no rough burrs, while also being energy-efficient and easy to operate.
5. Package Contents: The heat cutter comes with a variety of blades (Pointed, Arc, R-type, Shovel-type), a hex wrench, a cleaning brush, and an English manual, making it ideal for architectural modeling, design, and DIY projects.
6. Important Note: The hot cutter is designed for short-term use, and continuous operation for a long time can lead to transformer failure and excessive bending of the cutting blade. It is recommended to operate the cutter for 15 seconds and then allow for a 45-second cooling period.
7. Versatile Cutting: The cutter can be adjusted for different materials, making it suitable for cutting foam, EPE, PU, insulation board, KT board, non-woven fabric, and more.
Specifications:
– Color: Red
– Voltage: 220V 50Hz
– Power: 100W
– Adjustable Temperature: 50-500℃
– Type: Pointed/Arc/R-type/Shovel-type
– Size: 180x125x35mm/7x5x1.4in
Package Contents:
– 1 * Fabric Cutter Rope Cutter with 4 types of blades
– 1 * Wrench
– 1 * Brush
– 1 * English Manual
Related Products
-
SOLO 2 – Rope clamp
A hyperlight compact ascender with an ergonomic design that makes it very easy to use. Perfect for ascension, verified for traversing, and can also be used in block-and-tackle systems. The lower hole is shaped for optimal positioning of the carabiner while the upper hole fits a safety carabiner to secure the rope. The toothed cam is finished with a special anti-wear treatment and features drain holes to help prevent the build up of mud and grit. The opening mechanism is simple and secure with the ability to lock the device open for easier attachment and a removable pull cord that…
-
OTTO STANDARD – Descender
$ 31.00One of the lightest figure eights on the market, our Standard Figure Eight offers a smooth rappel with minimal impact on the rope. The secret to rappelling on a figure eight without twisting the rope is to always feed the rope from directly below—never hold the rope off to the side or at an angle.
-
JANUS PRO – Pulley
A high strength multifunctional double pulley for block-and-tackle systems and complex operations. Features large wheels, a main attachment point that accommodates three carabiners, and a large becket with a large bottom attachment point and two secondary attachment points on the sides for linking, positioning and attaching progress capture systems. For use with ropes up to 16 mm. Prusik minding, the self-locking knot can be installed on both sides of both wheels. Sealed ball bearings for high efficiency and intensive use at high speed. Efficiency: 97%. Aluminum alloy body and wheels, stainless steel axle.
-
ANDRY – Pulley
$ 18.00A light-duty steel pulley designed to be used for tensioning safety nets. For use with ropes up to 12 mm in diameter. Efficiency: 70%. Carbon steel body and axle, polyamide wheel.
