FLYTE – Pulley
Linear double pulley with stainless steel wheels. Sealed ball bearings for low friction and increased speed. Specifically conceived for crossing cables and zip lines.
Accommodates ropes up to 13 mm and steel cables up to 12 mm in diameter.
Large main attachment hole and secondary attachment point on top.
Working load limit: 10 kN
Breaking load: 20 kN
| Ref. | Product name | Weight | Inner sheave diameter | Rope diameter Max | Cable diameter Max | Working load Max | Breaking load | Ball bearings | Sheave material |  | |||
| g | oz | mm | mm | mm | kN | LBF | kN | LBF | EN 12278 | ||||
| 3121 | FLYTE | 280 | 9.9 | 21 | 13 | 12 | 10 kN | 2248 LBF | 20 | 4497 | • | Stainless steel | • |
Related Products
- Read more
TURBOFOOT – Foot ascender
Proprietary rollers increase climbing efficiency and decrease wear and tear on the device and ropes Innovative straps provide a secure and ergonomic fit on boots Can be rigged as a locking pulley for light hauling (max load 50 kg, 110 lbs) For ropes from 8 to 13 mm Available in right and left versions
- Read more
TURBOHAND BLACK – Hand ascender
The Turbohand ascender uses proprietary technology and cutting edge design to make climbing ropes safer, faster and easier. It features a proprietary roller. Which not only helps with climbing efficiency by making the upward glide much smoother, it also reduces dangerous wear and tear on the device where the rope tends to rub on the body of a traditional ascender. The ergonomic rubber handle extends into the upper part of the spine to allow for a double-handed grip. The handle and the rope are aligned on the same plane for the best handling and efficiency. Features three large attachment points,…
- Read more
TURBOCHEST – Chest ascender
A revolutionary chest ascender that features two proprietary rollers for a smooth interface with the rope. This not only helps with climbing efficiency by making the upward glide much smoother. It also reduces dangerous wear on the device where the rope tends to rub on the body of a traditional ascender. The perfectly profiled closure keeps the rope in line with the body of the device and the rollers to prevent the rope from escaping the device during tight pendulums and traverses. The toothed cam is finished with a special anti-wear treatment and features drain holes to help prevent the…
- Read more
DRUID – Descender
A lightweight, compact auto-braking descender for rope access and rescue designed for semi-static ropes ranging from 10-11 mm. Proprietary anti-panic function in the lever re-engages the cam if the handle is pulled too far where it could lead to unsafe descent speeds. The body and lever are made of robust hot-forged aluminum alloy. Mechanical parts are made of precision-cast stainless steel. The internal mechanism and locking cam use a patented design for smooth action on the rope which prevents rapid wear-and-tear and absorbs energy from small shocks with a slight amount of rope slippage. The fluid action on the rope…
