Turbolock – Progress capture pulley
ACTIVITIES
| Ref. | Product name | Weight | Inner sheave diameter | Rope diameter Min | Rope diameter Max | Working load Max | Breaking load | Ball bearings | Sheave material |  |
|
|
 |
||||
| g | oz | mm | mm | mm | kN | LBF | kN | LBF | EN 12278 | EN 567 | EN 12841/B | ||||||
| 3185 | TURBOLOCK | 198 | 7.0 | 41 | 8 | 13 | 2.5 kN x 2 = 5 kN | 562 LBF x 2 = 1124 LBF | 23 | 5620 | • | Aluminum alloy | • | • | • | • | |
The Turbolock is a progress capture pulley designed to be exceptionally compact, robust and efficient.
Specifically contoured for operation with one hand. The locking mechanism for opening and closing allows the rope to be inserted without removing the device from the anchor and it cannot be opened when the pulley is loaded to prevent accidental openings during use.
Toothed cam is designed for an immediate and strong grab on ropes from 8 to 13 mm.
The cam is enabled and disabled with a switch that is protected inside the flanges to prevent accidental activations. One movement to open the cam for easier insertion or removal of the rope or to use the device as a non-locking simple pulley. Two movements to enable the cam.
The two attachment points (main attachment point and the becket hole) allow for the rotation of carabiners for maximum ease of use.
Large diameter sheave with sealed ball bearings for very high efficiency (95%).
Robust construction features hot forged side plates, precision milled aluminum alloy sheave, and stainless steel cam, rivets and pins.
Related Products
-
INSPECTING PPE – Manual
“Inspecting P.P.E.” is a publication that meets the relevant demands of users and controllers of Personal Protective Equipment against falls from a height, work positioning, rope access, technical rescue and mountaineering. This manual is structured in 16 chapters with a comprehensive general introduction and practical instructions for the inspection of all PPE product categories.
-
OTTO LARGE – Descender
$ 34.00This slightly larger version of our Standard Figure Eight features a larger bottom hole that allows it to be used as a Sticht plate for belaying with single ropes. Due to the thick body, it also has very smooth action on rappels.
-
WING 2 ARMS
Replacement caps with the upright arms for carrying backup lines designed to fit with both the Wing 2 and older versions of the Wing.
-
TURBOCHEST – Chest ascender
A revolutionary chest ascender that features two proprietary rollers for a smooth interface with the rope. This not only helps with climbing efficiency by making the upward glide much smoother. It also reduces dangerous wear on the device where the rope tends to rub on the body of a traditional ascender. The perfectly profiled closure keeps the rope in line with the body of the device and the rollers to prevent the rope from escaping the device during tight pendulums and traverses. The toothed cam is finished with a special anti-wear treatment and features drain holes to help prevent the…
