Turbolock – Progress capture pulley
ACTIVITIES
| Ref. | Product name | Weight | Inner sheave diameter | Rope diameter Min | Rope diameter Max | Working load Max | Breaking load | Ball bearings | Sheave material |  |
|
|
 |
||||
| g | oz | mm | mm | mm | kN | LBF | kN | LBF | EN 12278 | EN 567 | EN 12841/B | ||||||
| 3185 | TURBOLOCK | 198 | 7.0 | 41 | 8 | 13 | 2.5 kN x 2 = 5 kN | 562 LBF x 2 = 1124 LBF | 23 | 5620 | • | Aluminum alloy | • | • | • | • | |
The Turbolock is a progress capture pulley designed to be exceptionally compact, robust and efficient.
Specifically contoured for operation with one hand. The locking mechanism for opening and closing allows the rope to be inserted without removing the device from the anchor and it cannot be opened when the pulley is loaded to prevent accidental openings during use.
Toothed cam is designed for an immediate and strong grab on ropes from 8 to 13 mm.
The cam is enabled and disabled with a switch that is protected inside the flanges to prevent accidental activations. One movement to open the cam for easier insertion or removal of the rope or to use the device as a non-locking simple pulley. Two movements to enable the cam.
The two attachment points (main attachment point and the becket hole) allow for the rotation of carabiners for maximum ease of use.
Large diameter sheave with sealed ball bearings for very high efficiency (95%).
Robust construction features hot forged side plates, precision milled aluminum alloy sheave, and stainless steel cam, rivets and pins.
Related Products
-
INSPECTING PPE – Manual
“Inspecting P.P.E.” is a publication that meets the relevant demands of users and controllers of Personal Protective Equipment against falls from a height, work positioning, rope access, technical rescue and mountaineering. This manual is structured in 16 chapters with a comprehensive general introduction and practical instructions for the inspection of all PPE product categories.
-
WING, WING 2 CAPS
Two bolt-on replacement caps prevent accidental entanglement from clothing and hair and carry backup lines along with the pulley.
-
JANUS PRO – Pulley
A high strength multifunctional double pulley for block-and-tackle systems and complex operations. Features large wheels, a main attachment point that accommodates three carabiners, and a large becket with a large bottom attachment point and two secondary attachment points on the sides for linking, positioning and attaching progress capture systems. For use with ropes up to 16 mm. Prusik minding, the self-locking knot can be installed on both sides of both wheels. Sealed ball bearings for high efficiency and intensive use at high speed. Efficiency: 97%. Aluminum alloy body and wheels, stainless steel axle.
-
OTTO LARGE – Descender
$ 34.00This slightly larger version of our Standard Figure Eight features a larger bottom hole that allows it to be used as a Sticht plate for belaying with single ropes. Due to the thick body, it also has very smooth action on rappels.
